Honeywell Thor VM3 User Manual page 164

Select a Power Plan
(Start) > Control Panel > Power Options (Large or Small Icon View)
The Thor VM3 has four power management as described in the following sections.
Select the AC/DC power plan when it is desired that the Thor VM3 power on when exter-
nal power is connected.
In AC/DC mode, the Thor VM3 is turned On by the presence of external power with no
user interaction required. Ignition input is ignored when AC/DC mode is enabled.
Note: When the UPS battery has been depleted or disconnected (the Thor VM3 is first powered
out of the box, the front panel has been replaced, etc.) power the Thor VM3 manually by
pressing the power button. After the initial power up, the Thor VM3 powers on
automatically when power is attached and AC/DC mode is enabled.
AC/DC Behavior
When the AC/DC plan is selected and external power is present the Thor VM3 behaves
as described below. If external power is not present, refer to the
VM3 behavior.
Thor VM3 is Off
Conditions
The Thor VM3 is Off and gets external power, such as
•
154 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Thor VM3 is installed on a powered Smart Dock with the dock power switch On
UPS section for Thor