Sounds - Honeywell Thor VM3 User Manual

Sounds

(Start) > Control Panel > Sounds and Audio Devices (Classic View)
(Start) >Control Panel > Sounds, Speech and Audio Devices (Category View)
Use the slider bar to adjust the volume level as desired.
Alternatively:
•
•
•
174 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Tap the Volume icon, if present, in the taskbar and move the slider until the volume
level is as desired.
Use the integrated keypad - press the Blue key then P1 to adjust volume up or Blue
then P2 to adjust volume down.
By default the side tone is muted. If needed, the user should enable the side tone. If
this causes interfering noise, the side tone should be disabled. The VM3 audio is
designed to be used with or without the side tone. This is acceptable permissible
performance for the Thor VM3.