Honeywell Thor VM3 User Manual page 197

•
Close
Closes the open data file.
Save
Saves the open data file as a ccf file.
•
•
Save As
Saves the open data file as a ccf. If a ccf file was opened, this option allows a new name
or location for the data file to be specified during the save process.
Exit
Exits the CCU. A prompt may be displayed if there are unsaved ccf changes.
Edit
Provides access to the standard Windows Cut, Copy and Paste functions. These func-
tions can be used to manipulate the settings within the configuration file.
Registry
Reads values from and writes values to the system registry.
Import Settings
Imports the current settings from the Windows registry for the selected application(s).
When selected, the available programs from which settings can be read are displayed in
a tree format.
Apply Settings
Applies the current settings to the Windows registry for the selected applications.
During the process, a Default all Non-Configured Parameters prompt is displayed:
•
•
•
Upon completion, exit the CCU and reboot the Thor VM3 so changes can take effect.
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Use this option if you wish to start a configuration settings file based on the factory
defaults.
ccf files - These files contain the modified values for the software settings. These files
are created with the CCU . ccf files are encrypted for security. Once a ccf file is created
on one Thor VM3 it can be copied to other Thor VM3s to duplicate the configuration.
An existing ccf file can be opened, modified, applied to the Thor VM3, saved, saved
with a different name, etc.
If a ccf file was opened, it is saved with the same name and in the same location.
If a ddf file was opened, a prompt is displayed for the name to assign to the new ccf
file. By default a new file is saved at C:\Windows\DDF though a different location can
be specified.
Tap Yes to set all parameters not configured in the ccf file to defaults on the
destination device.
Tap No to apply the values from the ccf file and leave all other parameters as-is on the
destination device.
Tap Cancel to exit with no changes to the destination device.
187