6. Locate the mSATA card installation slot.
7. Tilt the card at a 45º angle and insert the connector end of cards
8. Once the connector end is inserted, lower the card until the other
9. Reattach the access panel, torquing the screws to 7.0 ± 0.5 inch
10. Reinstall the Thor VM3 in the dock.
11. Restart the Thor VM3.
12. When using Windows explorer to view My Computer, the mSATA
126
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
into the slot.
end is captured and secured by the anchor pins.
pounds.
expansion card is identified as Hard Disk Drive, usually Drive D:.