Bar Code Readers; Scanner (Virtual) Wedge; Touch Screen Calibration; File Based Write Filter And Enhanced Write Filter - Honeywell Thor VM3 User Manual

Bar Code Readers

The Thor VM3 can use the following external bar code readers:
•
•
•

Scanner (Virtual) Wedge

Virtual wedge parameters are set via

Touch Screen Calibration

To calibrate the touch screen:
1. Browse to the C:\Honeywell\Touch_5W folder.
2. Tap HIDeGalaxTouch.exe.
3. Select 4 Points Calibration.
4. Follow the on screen instructions to touch the screen, hold the touch and then lift

File Based Write Filter and Enhanced Write Filter

Note: For a Thor VM3 with Windows Embedded Standard 7 operating system only.
These options can be accessed by tapping the lock icons in the system tray.
The Thor VM3 uses a standard Microsoft implementation of these features.
180 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Tethered hand-held scanners are tethered to a serial port or a USB host port (via a
dongle cable) on the Thor VM3 Smart Dock and are configured by scanning the
engine-specific bar codes in the scanner manufacturer's programming guide. The
manufacturer's guides are usually shipped with the bar code reader.
Wireless hand-held Bluetooth scanners are configured by scanning the engine-
specific bar codes in the scanner manufacturer's programming guide. The
manufacturer's guides are usually shipped with the bar code reader.
The body worn Bluetooth Ring Scanner module may be using a Symbol 4400 Ring
Imager or a Symbol 955 Ring Scanner. The BTRS module is configured by scanning
the bar codes in the Bluetooth Ring Scanner Guide.
the stylus to complete the calibration process.
Enterprise Settings.