Honeywell Thor VM3 User Manual page 160

Remap a Key to Launch an Application
1. Select the modifier key from the Modifier Mode options.
2. The key to be remapped is the programmable function (PF) key on the numeric
3. Select Launch App1-2 from the remapped key from the Remapped Key pull-down
4. Make sure the APP radio button is selected.
5. In the text box (LaunchApp1-2) corresponding to the number selected for Launch
6. If any parameters are needed for the application, click on the OPT radio button. This
7. Click OK to save the result and close the control panel.
8. If the KeyMap tab is accessed again, the application plus any specified parameters
Remap a Key to Run a Command
1. Select the modifier key from the Modifier Mode options.
2. The key to be remapped is the programmable function (PF) key on the numeric
3. Select RunCmd1-2 from the remapped key from the Remapped Key pull-down list.
4. Make sure the CMD radio button is selected.
5. In the text box (RunCmd1-2) corresponding to the number selected for RunCmd1-2,
6. If any parameters are needed for the command, click on the PARM radio button.
7. Click OK to save the result and close the control panel.
150 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
keyboard.
list.
App1-2, enter the application to launch.
clears the text box (though the application name is saved). Enter the desired
parameters in the appropriate text box.
is displayed in the Key Sequence text box when the remapped key is again selected.
keyboard.
enter the desired command.
This clears the text box (though the command is saved). Enter the desired
parameters in the appropriate text box.