Options - Honeywell Thor VM3 User Manual

Options

(Start) > Control Panel > Options (Large or Small Icon View)
5V on COM1
By default, Pin 9 of COM1 provides +5V, such as for an external scanner tethered to the
COM1 port. Uncheck this box to configure Pin 9 of COM1 to provide RI.
5V on COM2
By default, Pin 9 of COM2 provides +5V, such as for an external scanner tethered to the
COM2 port. Uncheck this box to configure Pin 9 of COM2 to provide RI.
Touch Screen Disable
By default, this option is unchecked and the touch screen is enabled. If this option is
checked, it may be necessary to attach an external keyboard or USB mouse to access
this screen to re-enable the touch screen unless a
assigned to enable the touch screen.
Note: Tapping Apply disables the touch screen but does not dismiss this panel. The panel must
be dismissed via an external keyboard or mouse. This panel is dismissed when the OK
button is tapped after selecting Touch Screen Disable.
Keyboard Backlight
By default, the integrated keyboard backlight follows the display backlight. Uncheck
this box to turn the keyboard backlight off regardless of the display backlight status.
USB Powered in Sleep
By default, power is removed from attached USB devices when the Thor VM3 is in
Standby or Sleep mode. Check this box to maintain power to attached USB devices in
Standby or Sleep
152 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Programmable Key has been