Honeywell Thor VM3 User Manual page 177

4. Click OK to save the result and close the control panel.
Remap a Key to Launch an Application
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select Launch App1-4 from the remapped key from the Remapped Key pull-down
4. Click on the
5. Make sure the APP radio button is selected.
6. In the text box (LaunchApp1-4) corresponding to the number selected for Launch
7. If any parameters are needed for the application, click on the OPT radio button. This
8. Click OK to save the result and close the control panel.
9. If the KeyMap tab is accessed again, the application plus any specified parameters
Remap a Key to Run a Command
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select RunCmd1-4 from the remapped key from the Remapped Key pull-down list.
4. Click on the
5. Make sure the CMD radio button is selected.
6. In the text box (RunCmd1-4) corresponding to the number selected for RunCmd1-4,
7. If any parameters are needed for the command, click on the PARM radio button.
8. Click OK to save the result and close the control panel.
9. If the KeyMap tab is accessed again, the command plus any specified parameters is
LaunchApp
The default for all text boxes is Null or " ". The text boxes accept string values only.
The executables and parameters are not checked for accuracy by the keyboard driver. If
the launch fails, the Thor VM3 displays a popup error message. If the launch is success-
ful, no notification is displayed.
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
• Launch the touch screen calibration utility
list.
LaunchApp
App1-4, enter the application to launch.
clears the text box (though the application name is saved). Enter the desired
parameters in the appropriate text box.
is displayed in the Key Sequence text box when the remapped key is again selected.
RunCmd
enter the desired command.
This clears the text box (though the command is saved). Enter the desired
parameters in the appropriate text box.
displayed in the Key Sequence text box when the remapped key is again selected.
tab.
tab.
167