Honeywell Thor VM3 User Manual page 199

The left side of the upper pane displays the current program settings that have been
imported or are part of the open ccf file. Click the + icon to expand the tree or the - icon
to condense the tree. When the tree is expanded sufficiently to view the settings, the
settings are displayed in the right portion of the upper pane. When a parameter is
selected, the name of the parameter is highlighted in blue. The parameter name
remains highlighted in blue (regardless of if the value was changed or not) until the
parameter name button is tapped a second time. Enter a new value for the parameter as
desired. Depending on the parameter selected, the following entry types are available:
•
•
•
When all desired parameter settings have been made, tap File > Save to save as a ccf file
which can be used to deploy these settings on another Thor VM3.
If the parameter setting changes should also be applied to this Thor VM3, select Regis-
try > Import Settings. After importing the settings, a reboot is necessary for the
changes to take effect on the Thor VM3.
Do not attempt to modify programmable key settings within the CCU GUI.
Instead, make all programmable key changes using the
control panel before importing the OS Control Panel into the CCU.
Using the CCU
Refer to the following examples for instructions on using the CCU.
Example 1: Import the current settings and save to a file
To import the current settings from the Thor VM3 running the CCU:
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Text box - This is an open entry field and a new value can be typed into the text box.
Depending on the parameter, there may be validity checking to ensure the entry in
the text box is within the valid range.
Pull-down list - A down arrow indicates the setting must be selected from a pull-down
list of available values. Expand the list and select the desired setting from the list of
options.
Button - Items with two choices (such as Off or On) are displayed as a button.
Tapping the button switches the value for the parameter.
Programmable Key
189