Honeywell Thor VM3 User Manual page 222

10. Select the desired authentication method. Any of the available options may be used.
11. The About tab provides Cisco copyright information.
12. Tap OK to close all open windows.
13. From the profile listing, make sure the desired profile is active.
14. If prompt for username and password option was selected, enter the credentials
when prompted.
Note: If the credentials are not entered when to window first pops up, the credentials window can
become hidden behind other windows.
15. Verify the connection using Status.
212 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide