Sleep Mode; Off Mode - Honeywell Thor VM3 User Manual

If the Thor VM3 is Full On, a press of the power button can be configured to put the unit
in Standby. See the

Sleep Mode

When the sleep timer expires without a primary event occurring, the Thor VM3 transi-
tions to Sleep mode. Pressing the Power button exits Sleep mode and transitions the
Thor VM3 to Full On.
When in Sleep mode, the status LED:
•
•
By default, power is turned off to the USB port when the Thor VM3 is in Standby/Sleep
mode.
The Thor VM3 can be configured to provide power to the USB port in Standby/Sleep
using the
Hibernate Mode
When the Thor VM3 enters hibernate mode, all LEDs are off. Pressing the Power button
returns the Thor VM3 to Full On.
When in Hibernate Mode, the status LED:
•
•
Power is turned off to the USB port when the Thor VM3 is in Hibernate.

Off Mode

By default, pressing the Power button shuts down the Thor VM3. This behavior can be
modified. See
The Thor VM3 is also off when it is not connected to a power source and the UPS battery
is depleted. However, an internal Real Time Clock (RTC) powered by an internal battery
maintains the date and time while the Thor VM3 is off.
30 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Choose What the Power Button
blinks green very slowly if external power is attached.
is off if external power is not attached.
Options control panel.
blinks green very slowly if external power is attached.
is off if external power is not attached.
Choose What the Power Button
Does.
Does.