Honeywell Thor VM3 User Manual page 218

LEAP
To configure for Cisco LEAP:
1. Set Security type to WPA2-Enterprise or CCKM.
2. Set Encryption type to AES.
3. Tap the Settings button.
4. Select the desired credentials method of providing credentials. Prompt
5. If saved username and password is selected, enter the credentials now.
6. Tap OK to close all open windows.
7. From the profile listing, make sure the desired profile is active.
208 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
automatically for username and password is recommended.