Honeywell Thor VM3 User Manual page 154

About the Structure of Enterprise Settings
Use the tables below to help find the parameters in Enterprise Settings that you want to
configure. Each table contains the parameters for one of the Enterprise Settings Main
Menu options.
If you see > next to a menu option, there are more screens available in the next level. If
you see ... next to a menu option, there is only one more screen available.
Most parameters are saved as soon as you tap OK. Some settings require you to reboot
the computer for the changes to take effect.
Data Collection
Tethered Scanners
Tethered/USB-Configure on
Connect
Enable USB Scanner Auto Detect
Tethered Scanner (COM1)
Tethered Scanner (COM2)
Note:
Note:
Note:
Bluetooth Scanners
BT-Configure on Connect
Bluetooth
Power
Discoverable
144 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
By default, COM1 and COM2 are enabled as scanner ports. To use the COM port for another use
(such as screen blanking), set Enable Scanner Port to Off for the desired port.
Symbology configuration is supported on Intermec scanners. For all other scanners use the bar
codes provided in the scanner manuals to program the symbologies.
Do not select ASCII as the scanner model for an Intermec scanner or the ability to configure the
symbology settings with Enterprise Settings is lost.
Parameters
Auto-configure on connect:
• Overwrite with computer settings (default)
• Keep scanner settings
Off (default)
• Enable scanner port (On by default, see note below)
• Symbologies
• Symbology Options
• Scanner Settings
• Scanner port Settings
• Decode Security
• Enable scanner port (On by default, see note below)
• Symbologies
• Symbology Options
• Scanner Settings
• Scanner port Settings
• Decode Security
Auto-configure on connect:
• Overwrite with computer settings
• Keep scanner settings
Parameters
• Off
• On (default)
• Disable (default)
• Enable