Honeywell Thor VM3 User Manual page 171

UPS
When the Thor VM3 is operating on the UPS the timeouts from the battery section for
the selected power plan are used. By default, the timeouts for UPS are the same for each
power plan.
UPS Behavior
The Thor VM3 behavior when operating from UPS power is described below.
Thor VM3 is Off
Conditions
The Thor VM3 is Off and the power button is pressed the Thor VM3 and the following
condition is met:
•
Result
The Thor VM3 boots and follows the selected power scheme's Running on Batteries (or
power plan's On battery) timeouts with power management timers reset at boot up.
Conditions
The Thor VM3 is Off and the power button is pressed the Thor VM3 and the following
condition is met:
•
Results
The Thor VM3 remains Off.
Thor VM3 is On
Conditions
The Thor VM3 is On and external power is removed, such as:
•
•
•
Result
The Thor VM3 boots and follows the selected power scheme's Running on Batteries (or
power plan's On battery) timeouts with power management timers reset at the time of
power removal. UPS charging is disabled.
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
UPS power is over 35% capacity
UPS power is under 35% capacity
Thor VM3 is removed from a powered dock (Dock power switch On)
Thor VM3 is mounted to a dock and truck power is removed from the dock
Thor VM3 is mounted to a dock and the dock power switch is turned Off
161