Honeywell Thor VM3 User Manual page 159

3. Select Unicode from the pull-down list.
4. There are two Unicode text boxes located on the lower part of this tab. Enter the
5. Click OK to save the result and close the control panel.
Remap a Key to a Key Sequence
Up to 16 keys may be specified for the key sequence. The sequence can consist of keys
and Unicode values.
1. Select the modifier key from the Modifier Mode options.
2. The key to be remapped is the programmable function (PF) key on the numeric
3. Select Key Sequence from the pull-down list.
4. Select the first key for the multiple key sequence from the pull-down list.
5. Press the Add button to add the key to the multiple key sequence shown in the Key
6. Repeat this steps 4 and 5 until all desired keys have been added to the key
7. Click OK to save the result and close the control panel.
Remap a Key to a Sequence of Unicode Values
Up to 16 Unicode values may be specified for the key sequence. The sequence can con-
sist of keys and Unicode values.
1. Select the modifier key from the Modifier Mode options.
2. The key to be remapped is the programmable function (PF) key on the numeric
3. Select Key Sequence from the pull-down list.
4. Select Unicode from the Key Sequence pull-down list.
5. There are two Unicode text boxes located on the lower part of this tab. Enter the
6. Press the Add button to add the key to the multiple key sequence shown in the Key
7. Repeat this steps 4 through 6 until all desired characters have been added to the key
8. Click OK to save the result and close the control panel.
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Unicode value in the text box to the right of ALT + and the Unicode character is
displayed in the box to the right of =.
keyboard.
Sequence box.
sequence. If necessary, use the Clear button to erase all entries in the Key Sequence
box.
keyboard.
Unicode value in the text box to the right of ALT + and the Unicode character is
displayed in the box to the right of =.
Sequence box.
sequence. If necessary, use the Clear button to erase all entries in the Key Sequence
box.
149