Honeywell Thor VM3 User Manual page 250

Connection Type
Use this tab to configure the connection parameters. The tab is identified by the type of
connection, i.e.: UMTS, LTE, UDMA, etc. The label on this tab corresponds to the Tech-
nology field on the
Note that the SIM card being configured (Sim1 or Sim2) is identified at the top of this
tab.
If the WWAN radio fails to connect, please check that the correct APN is
entered. This entry can be verified by contacting the WWAN carrier.
An APN mismatch may generate an error message, however this is not
always the case. The first step in diagnosing a connection error should be to
verify the APN.
If using a private APN, entries are available for User Name and Password, as well as a
choice for Authentication. If these items are not present, contact
software upgrade options.
If using a public APN, the software upgrade is usually not necessary.
After all entries are completed, tap the Save button.
240 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
About tab.
Customer Support for