Figure 3-54 Usb Device Selection Screen; Figure 3-55 Disk Partition Selection Screen - Honeywell HRHD4+ User Manual

Configuration
1.
2.
When the selected drive has more than two partitions, the following Disk Partition
Selection screen displays. If the file system is not FAT16 or FAT32, the Type displays
Not Supported.
After you select the drive and partition to use for clip copy, the DVR displays the drive
capacity and the clip size, and asks if you want to continue.
You can use other functions on the DVR while video is being copied. To do this,
highlight Close and then press . You can return to the Clip Copy screen at any time
to check the progress.
Rev 1.00
Select the drive to use for clip copy and then press
Select Return to Clip Copy Menu and press
to the Clip Copy screen without saving the changes.
Figure 3-54
Figure 3-55
Note Do not copy clips larger than 2 GB.
USB Device Selection Screen
Disk Partition Selection Screen
73
.
to exit the screen and return
Document 900.0258
09/04