Table of Contents
Advertisement
USB Hard Disk Drive Preparation
USB Hard Disk Drive Preparation
This appendix covers how to prepare the USB-IDE hard disk drive for computers using
either Windows 2000 or Windows 98 operating systems.
Preparing The USB-IDE Hard Disk Drive In Windows
2000
1.
2.
3.
4.
5.
6.
Rev 1.00
Note
Preparing a USB-IDE hard disk drive under Windows XP is
almost identical to Windows 2000.
Connect the USB-IDE hard disk drive to your computer using the USB cable.
Turn on your computer.
The USB device icon should display on the Taskbar.
If the USB-IDE hard disk drive is partitioned or has data, it will show up in My
Computer as a hard disk drive icon. Check the file system by right clicking on
the icon and checking under Properties
file system is not FAT32 format, format the USB-IDE hard disk drive using the
FAT32 format.
If the USB-IDE hard disk drive is not partitioned, go to Administrative Tools
in Control Panel and start Computer Management. Open Disk
Management in Storage and right click an unallocated region of the USB-IDE
hard disk drive. Then, click Create Partition.
In the Create Partition wizard, click Next, then Primary Partition, and follow
the instructions on the screen. Make sure that FAT32 is selected for the file
system.
91
General
File System. If the
Document 900.0258
A
09/04
Advertisement
Table of Contents
