Table of Contents
Advertisement
Configuration
5.
Alarm In Event Action (Alarm Out) Setup Screen
Use this screen to set how the DVR reacts to events differently by activating an
internal buzzer or external alarms.
1.
2.
3.
Rev 1.00
Highlight the Dwell box and set the length of time you would like to record for
the associated event.
Figure 3-32
Highlight the Sched box and then press
schedule as described earlier.
Highlight the Alarm Out box and select Beep and/or the alarm output
terminal that you want to associate with the sensor.
Highlight the Dwell Time box and set the length of time you want the output
activated.
Note
When setting the dwell time to 0 sec, the alarm output will be
activated throughout the sensor activation period, and inactive
while the sensor is inactive.
Alarm In Event Action (Alarm Out) Setup Screen
52
. A schedule screen displays. Set the
Document 900.0258
09/04
Advertisement
Table of Contents
