Modem Setup; Figure 3-45 Modem Setup Screen - Honeywell HRHD4+ User Manual

Configuration
Caution
2.

Modem Setup

Use the Modem Setup screen (MENU
Modem) to configure your modem.
1.
2.
Rev 1.00
When you change the IP port settings you must also change the
IP port settings on a PC running RAS. Refer to the RAS User Guide
for detailed information.
To save your changes and return to the Network Setup screen, highlight OK and
then press . Select Cancel to exit the screen without saving the changes.
Figure 3-45
Note Modem setup is done through the RS232/RS485 screen
in the Devices menu which can be accessed from the
Main Menu.
If the RS232 port is in use for the remote control, the
networking cannot be configured by the modem. In the
RS232/RS485 Setup menu, set up the RS232 port to
communicate with the external modem first.
Highlight the box beside Baud Rate of the RS232 field and then press
of baud rates ranging from 300 to 115,200 displays.
Highlight the box beside Parity of the RS232 field and then press
drop-down list displays. You can select from None, Odd, or Even parity.
Network
Modem Setup Screen
64
Network Setup
. A list
. A
Document 900.0258
09/04