Table of Contents
Advertisement
Configuration
To upgrade the software:
1.
2.
Caution
Date/Time Setup
Highlight Date/Time in the System menu (MENU
then press
Rev 1.00
Connect the USB device containing the upgrade package file to the DVR.
Highlight Upgrade ... and then press
showing the upgrade package file name.
Figure 3-8
System upgrade via USB port might not be completed properly if
a USB device has been connected to the other USB port. Please
remove any other USB device before system upgrade is
attempted.
Note
If the file system on the USB-IDE hard disk drive or USB Flash
drive is not FAT16 or FAT32 format, format the drive using
FAT16 or FAT32 format.
. The Date/Time setup screen displays.
. The System Upgrade screen displays,
System Upgrade Screen
28
System
Date/Time) and
Document 900.0258
09/04
Advertisement
Table of Contents
