Network Setup Screen; Figure 3-43 Network Setup Screen - Honeywell HRHD4+ User Manual

Configuration
3.

Network Setup Screen

Use the Network Setup screen (MENU
up the DVR for LAN connections.
1.
2.
3.
Rev 1.00
Highlight the box beside Event Monitoring Dwell Time and then press
You can adjust the event monitoring dwell time from 3 to 60 seconds.
Figure 3-43
Highlight the box beside Connection. Press
Modem.
Highlight the box beside Admin Password and then press
keyboard displays (see
password. Then you can enter a new password; you will be asked to confirm the
new password before it is accepted.
Highlight the box beside User Password and then press
displays. You will first be asked to enter the current password. Then you can
enter a new password; you will be asked to confirm the new password before it
is accepted.
Note These passwords are for network use. They are
different from the Admin and User passwords for the
DVR itself.
The passwords are case sensitive. The factory default
password for both Administrator and User is 12345678.
Network
Network Setup Screen
Figure 3-7). You will first be asked to enter the current
61
Network Setup) to set
to toggle between LAN and
. A virtual
. A virtual keyboard
Document 900.0258
.
09/04