Table of Contents
Advertisement
Configuration
Highlight the box beside Interval and then press
synchronization from 1 to 300 minutes.
The box beside System Clock displays the DVR's time setting.
The box beside Server Clock displays the time setting of the time server. To update
the server clock, highlight Update then press
The box beside Next Synchronization displays the time when the next
synchronization is scheduled. To synchronize the time instantly, highlight Now ... and
then press
Caution
Highlight Run as Server and then press to toggle between On and Off. When it is
On, the DVR you are setting up will run as a time server.
To save your changes, highlight OK and then press
screen without saving the changes.
Highlight the box beside Date Format and press
Highlight the format you wish to use and then press
MM-DD-YYYY
DD-MM-YYYY
YYYY-MM-DD
Rev 1.00
Note
The Server Clock displays " – " when the DVR cannot load the
time information from the time server.
.
When selecting Now ..., any video with a later time and date
will be lost if the time and date of a time server is earlier than the
last recorded image of the DVR.
Note
When the time difference between the DVR and the time
server is more than one minute, the DVR might not
synchronize the time to prevent any unexpected loss of
recorded video data. If you want to synchronize the time
manually, select Now ....
31
. Set the time interval for
.
. Select Cancel to exit the
. A list of date formats displays.
. The choices are:
Document 900.0258
09/04
Advertisement
Table of Contents
