Table of Contents
Advertisement
Operation
1.
2.
3.
4.
Event Search
The DVR maintains a log of each time the Alarm Input port is activated. The Event Log
screen displays this list.
1.
Rev 1.00
Days with recorded video display on the calendar with white numbers. You can
highlight the days with recorded video by using the Arrow buttons. After you
have highlighted a day, press
A time bar displays at the bottom of the calendar. Hours in which video was
recorded will be highlighted with blue.
Use the Up and Down Arrow buttons to highlight the time bar. After the time
bar is highlighted, select the time by using the Left and Right Arrow buttons.
Note
The time bar is in one-hour segments. If a segment is
highlighted, it means that some video was recorded during that
hour. However, it does NOT mean video was recorded for the
entire hour.
After you have set the date and time you want to search, highlight GO and then
press
. The selected date and time displays.
You can now use the PLAY/PAUSE, RW, FF, Jog Dial and Shuttle Ring
controls to review the surrounding video.
Figure 4-8
Use the Arrow buttons to highlight the event for which you would like to see
video.
to select it.
Event Log Screen
87
Document 900.0258
09/04
Advertisement
Table of Contents
