Configuration
Turning on the Power
Connect the power cord to the DVR to turn on the unit. The DVR takes
approximately 60 seconds to initialize.
Initial Unit Setup
Before using your DVR for the first time, you should establish the initial settings. This
includes items such as time and date, display language, camera, audio, remote control,
record mode, network and password. Your DVR can be set up using various screens
and dialog boxes.
1.
2.
Rev 1.00
Press MENU to enter the setup screens. The Admin Password screen displays.
Figure 3-2
Enter the password by pressing the appropriate combination of Camera number
buttons and then Enter (
two Setup screens: Quick Setup and Normal Setup. The factory default is the
Quick Setup screen.
Note
The setup screens can also be accessed by entering the User
password if the User password is turned on. However, only
access to the Clip Copy and Password setup screens is
permitted.
Admin Password Screen
). The factory default password is 4321. There are
22
Document 900.0258
09/04