Figure 3-9 Date/Time Screen - Honeywell HRHD4+ User Manual

Configuration
Caution
1.
2.
3.
4.
5.
6.
Rev 1.00
Figure 3-9
If you set a date and time that is older than some of your
recorded images, any images with dates and times later than the
new setting will be deleted.
Highlight the first box beside Date/Time and then press
sections of the date highlight.
Use the Up and Down Arrow buttons to change the number. Use the Left and
Right Arrow buttons to move between month, day and year.
After you have the correct date, press
Highlight the second box beside Date/Time and press
sections of the time will highlight. Use the Up and Down Arrow buttons to
change the number. Use the Left and Right Arrow buttons to move between
hour, minutes and seconds. After you have the correct time, press
Note The clock will not start running until you have restarted the
unit, so you may wish to set the time last.
Highlight the box beside Time Zone and press
in from the list and press
Highlight the box beside Daylight Saving Time and press
toggles between On and Off.
Highlight the Holiday Setup... box and press
highlighting Add ... and pressing
Highlight the month and day and change them by using the Up and Down Arrow
buttons. Press to add the date. Dates can be deleted by highlighting the X
beside the date and pressing
Date/Time Screen
.
.
. The current date displays.
.
29
. The individual
. The individual
.
. Select the time zone you are
. Pressing
. You can set up holidays by
Document 900.0258
09/04