Table of Contents
Advertisement
Configuration
Alarm In Setup Screen
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
The inputs are displayed in groups of four. Use the Alarm In Setup screen to configure
each alarm input. Highlight Alarm In in the Device menu (MENU
Alarm-In) and then press
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
The inputs are displayed in groups of four. You can turn each input On or Off. Each
input can be given a title, and the inputs can be set as NO (normally open) or NC
(normally closed) independently.
To change the settings for all the cameras on the page (for example, cameras 1 to 4 in
Figure
change the option.
Motion Detector
Your DVR has a built-in video motion detector. Use the Motion Detector screen to
turn video motion detection On or Off for each camera and to define the area of the
image where you want to detect motion.
Highlight Motion Detector in the Device menu (MENU
Detector) and then press
Rev 1.00
Figure 3-19
Alarm In Screen
3-19), select either the Setup heading or the NC/NO heading first, then
. The Alarm In setup screen displays.
. The Motion Detector screen displays.
39
Device
Device
Motion
Document 900.0258
09/04
Advertisement
Table of Contents
