Table of Contents
Advertisement
Configuration
1.
2.
3.
4.
5.
Motion Detector Event Action (Alarm Out) Setup Screen
Use this screen to set the DVR to react to motion events differently by activating an
internal buzzer or external alarms.
1.
2.
3.
Rev 1.00
Highlight the Sched box and then press
schedule as described earlier.
Highlight the Camera box and then press
displays. Select the camera number you would like to associate with the camera.
Note
You can associate multiple cameras with a camera that detects
motion.
Highlight the Speed box and select number of images per second you would like
to record from the drop-down list.
Highlight the Quality box and select the image quality you want to record from
the drop-down list.
Highlight the Dwell Time box and set the length of time you would like to
record for the associated motion event.
Figure 3-35
Highlight the Sched box and then press
schedule as described earlier.
Highlight the Alarm Out box and select Beep and/or the alarm output
terminal that you want to associate with the motion event.
Highlight the Dwell Time box and set the length of time you want the output
activated.
Motion Detector Event Action (Alarm Out) Setup
Screen
54
. A schedule screen displays. Set the
. A camera selection screen
. A schedule screen displays. Set the
Document 900.0258
09/04
Advertisement
Table of Contents
