Table of Contents
Advertisement
Configuration
2.
Caution
3.
4.
Rev 1.00
If the password is set to On, you will be asked to enter the current password so
that you can turn it Off.
If the password is set to Off, you will be asked to enter the new password and
to confirm it before it will be turned on.
The Administrator password cannot be turned on and off. You can change the
Administrator password by first entering the current password, entering a new
password, and then confirming the new password.
To change the password, highlight the Password box and then press
window displays asking you to enter the current password. If you enter the
correct password, another window displays asking you to enter a new password
using the camera buttons. After you press
to confirm the new password.
Note
The Admin and User passwords are composed of up to eight
digits using the camera buttons. The default User password is
1234, and Admin password is 4321.
Write down the new password and save it in a secure place. If
the password is forgotten, the unit must be reset using the
Factory Reset Button and all data settings will be lost.
To lock front panel buttons, highlight Key Lock On and then press
buttons are locked, pressing any front panel button will cause a password screen
to display.The Administrator and User passwords are used to unlock the keys.
To save your changes, highlight OK and then press
screen without saving the changes.
, another screen displays asking you
68
. A
. After the
. Select Cancel to exit the
Document 900.0258
09/04
Advertisement
Table of Contents
