Configuration
Motion Detector Event Action (Notify) Setup Screen
Use this screen to set the DVR to notify the remote site when certain motion events
are activated.
1.
2.
Rev 1.00
Note
When setting the dwell time to 0 sec, the alarm output will be
activated throughout the sensor activation period, and inactive
while the sensor is inactive.
Figure 3-36
Highlight the Sched box and then press
schedule as described earlier.
Highlight the Notify box and then press
When it is On, the DVR notifies the remote site when certain events occur
based on a defined schedule.
Motion Detector Event Action (Notify) Setup
Screen
55
. A schedule screen displays. Set the
. This toggles between On and Off.
Document 900.0258
09/04