Quick Setup Screen - Honeywell HRHD4+ User Manual

4,9,16-channel models
Hide thumbs Also See for HRHD4+:
Table of Contents

Advertisement

Configuration

Quick Setup Screen

Use the Quick Setup screen to set up the most commonly used features of your DVR.
Use the Arrow buttons to move through the options. Pressing
selections.
1.
2.
3.
4.
Rev 1.00
Figure 3-3
Note
If you enter the Quick Setup screen by entering the User
password, only Password setup is permitted.
Highlight the box beside Quick Setup and press
Off. If you select Off, you will use the Normal Setup screen to change the DVR
settings.
Highlight the Recording Speed box and select recording speeds from as few as
one image every 10 seconds to as fast as 60 ips.
Note
The DVR has a maximum recording speed of 60 ips per camera,
however, the recording speed may not be achieved when
averaged over all cameras.
Highlight the Recording Quality box and select one of the options:
Very High, High, Standard, Low
Highlight the box beside Audio Recording and select either On or Off.
Quick Setup Screen
23
lets you make your
to toggle between On and
Document 900.0258
09/04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hrhd9+Hrhd16+

Table of Contents