Table of Contents
Advertisement
Configuration
5.
6.
7.
8.
9.
Clip Copy
Use the Clip Copy screen (MENU
clips to an internal CD-RW drive, or external USB hard disk drive, CD-RW drive or
Flash drive. The copied clip images can be viewed on computers running Microsoft
Windows 98, ME, 2000 or XP. Refer to
information on preparing the external drive for clip copy.
Rev 1.00
To save your changes, highlight OK and then press . Select Cancel to exit the
screen without saving changes.
Select Manual to display a screen where you setup manual archive parameters.
Figure 3-52
Highlight the boxes beside From and To and then press
start and stop times and dates.
After you set the archive start and stop parameters, highlight Archive Now and
then press
.
To end the archive process at any time, highlight Stop and then press
Note
The Stop button only displays during archiving.
Note
If you have a large quantity of recorded video to archive, either
stop recording or reset the recording speed. The oldest date to
be archived might be overwritten if the hard disk is full.
Manual Archive Screen
Configuration
Appendix A, USB Hard Disk Drive Preparation
71
to set up the archive
.
Clip Copy) to copy video
Document 900.0258
for
09/04
Advertisement
Table of Contents
