Table of Contents
Advertisement
Installation
WARNING!
Your DVR is now ready to operate. See
Operation.
Rev 1.00
Note
The power cord connector locks into position to prevent
accidental power loss. Be sure to slide the release away from
the socket before removing the plug.
Route power cords so they are not a tripping
hazard. Make certain the power cord will not be
pinched or abraded by furniture. Do not install
power cords under rugs or carpet.
The power cord has a grounding pin. If your power
outlet does not have a grounding pin receptacle, do
not modify the plug.
Do not overload the circuit by plugging too many
devices in to one circuit.
16
Chapter 3, Configuration
and
Chapter 4,
Document 900.0258
09/04
Advertisement
Table of Contents
