Connecting To The Network Port; Connecting To The Usb Port; Figure 2-11 Network Connector; Figure 2-12 Usb Connector - Honeywell HRHD4+ User Manual

Installation

Connecting to the Network Port

The DVR can be networked using the 10/100Mb Ethernet connector. Connect a
CAT5 cable with an RJ45 jack to the DVR connector. The DVR can be networked with
a computer for remote monitoring, searching, configuration, and software upgrades.
See

Connecting to the USB Port

Use the two USB ports to connect external hard disk drives, CD-RW or Flash drives
for clip copy or system upgrade.
1.
2.
Rev 1.00
Figure 2-11
Chapter 3, Configuration
Figure 2-12
Position the external hard disk drive close enough to the DVR so that you can
make the cable connections, usually less than 6 feet (1.83 m).
Use the USB cable provided with the hard disk drive to connect it to the DVR.
Network Connector
NETWORK
for configuring the Ethernet connections.
USB Connector
USB
12 Document 900.0258
09/04