Figure 3-44 Lan Setup Screen - Honeywell HRHD4+ User Manual

Configuration
1.
Rev 1.00
Figure 3-44
Note Obtain the appropriate IP Address, Gateway, Subnet Mask, and
IP Port Number for each RAS related program (Admin, Watch,
Search, and Callback) from your network administrator.
Change the numbers by highlighting them and using the Up and Down Arrow
buttons to increase or decrease the number.
The factory default LAN settings are:
IP Address
Gateway
Subnet Mask
The factory default IP Port settings are:
Admin
Watch
Search
Callback
Note Do not use the same IP port number for two different
programs; otherwise, the DVR cannot be connected with a PC
running RAS.
LAN Setup Screen
192.168.1.129
192.168.1.254
255.255.255.0
8200
8016
10019
8201
63 Document 900.0258
09/04