Alarm Out Setup Screen; Figure 3-23 Alarm Out Setup Screen - Honeywell HRHD4+ User Manual

Configuration
The menu choices are described as follows:
Table 3-3
Menu choice
Close this menu
Select Current Blocks
Clear Current Blocks
Select All Blocks
Clear All Blocks
Reverse All Blocks
Exit Zone Setup

Alarm Out Setup Screen

Use the Alarm Out setup screen to establish a schedule for each alarm output from
the DVR. Highlight Alarm Out from the Device menu (MENU
Alarm-Out) and then press
1.
Rev 1.00
Motion Detection Zone Choices
Figure 3-23
To give each alarm output its own title, highlight the box under the Title
heading and then press
you to enter the title.
Description
Closes the menu so that you can see the entire
screen.
Activates highlighted blocks to detect motion.
Deactivates highlighted blocks so that they will
not detect motion.
Activates all blocks to detect motion.
Deactivates all blocks so that they will not detect
motion.
Activates inactive blocks and deactivates active
blocks.
Asks you to confirm changes and then returns to
the previous screen.
. The Alarm Out Setup screen displays.
Alarm Out Setup Screen
. A virtual keyboard displays (see
42
Device
Figure 3-7) allowing
Document 900.0258
09/04