Time-Lapse Recording Schedule; Figure 3-29 Time-Lapse Recording Schedule Screen - Honeywell HRHD4+ User Manual

Configuration

Time-Lapse Recording Schedule

You can program the DVR to record only during certain times based on time, day of
the week, and holidays. The smallest time segment you can use is 30 minutes. A blue
rectangle indicates the DVR is set to record during those 30 minutes. When there is
no rectangle, the DVR will not record during those 30 minutes.
There are several ways to set recording times:
•
•
•
•
To save your changes, highlight OK and then press
screen without saving the changes.
Rev 1.00
Figure 3-29
You can highlight an individual block and toggle it On or Off by pressing
You can change a 30-minute segment for all days by placing the cursor on the
time line and then pressing
You can change an entire day by placing the cursor on the day of the week and
then pressing to toggle the day On or Off.
You can change the entire calendar by placing the cursor in the upper left-hand
box (above S and to the left of the time line) and then pressing
entire calendar On and Off.
Note The Holiday (H) schedule applies to the dates you established as
holidays when setting Date/Time.
Time-Lapse Recording Schedule Screen
to toggle the segment On or Off.
49
to toggle the
. Select Cancel to exit the
Document 900.0258
.
09/04