Keyboard Conversion - Honeywell ORBIT 7120PLUS User Manual

Caps Lock is used when you normally have the Caps Lock key on.
Shift Lock is used when you normally have the Shift Lock key on (not common to
U.S. keyboards).
Automatic Caps Lock is used if you change the Caps Lock key on and off. The soft-
ware tracks and reflects if you have Caps Lock on or off . This selection can only be
used with systems that have an LED that notes the Caps Lock status (AT key-
boards).
The Autocaps via NumLock bar code should be scanned in countries (e.g., Ger-
many, France) where the Caps Lock key cannot be used to toggle Caps Lock. The
NumLock option works similarly to the regular Autocaps, but uses the NumLock
key to retrieve the current state of the Caps Lock.
Emulate External Keyboard should be scanned if you do not have an external key-
board (IBM AT or equivalent).
Note: After scanning the Emulate External Keyboard bar code, you must power cycle your
computer.

Keyboard Conversion

Alphabetic keyboard characters can be forced to be all upper case or all lowercase.
So if you have the following bar code: "abc569GK," you can make the output
"ABC569GK" by scanning Convert All Characters to Upper Case, or to "abc569gk"
by scanning Convert All Characters to Lower Case.
24
Shift Lock
Autocaps via NumLock
Automatic Caps Lock
Emulate External Keyboard
Orbit 7120plus/7190g User Guide
Caps Lock