Gs1 Composite Codes - Honeywell ORBIT 7120PLUS User Manual

GS1 Composite Codes

Linear codes are combined with a unique 2D composite component to form a new
class called GS1 Composite symbology. GS1 Composite symbologies allow for the
co-existence of symbologies already in use. Default = Off.
UPC/EAN Version
Scan the UPC/EAN Version On bar code to decode GS1 Composite symbols that
have a U.P.C. or an EAN linear component. (This does not affect GS1 Composite
symbols with a GS1-128 or GS1 linear component.) Default = UPC/EAN Version Off.
Note: If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to
scan and output only the data from the GS1 DataBar code. See
Output
GS1 Composite Code Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435.
Minimum Message Length
132
On
UPC/EAN Version On
(page 109) for further information.
(page 86) for additional information. Minimum and Maximum
Maximum Message Length
* UPC/EAN Version Off
Coupon GS1 DataBar
Orbit 7120plus/7190g User Guide
* Off
Message Length