High Priority Symbology; Low Priority Symbology; Preferred Symbology Time-Out - Honeywell ORBIT 7120PLUS User Manual

High Priority Symbology

To specify the high priority symbology, scan the High Priority Symbology bar code
below. On the
want to set as high priority. Locate the Hex value for that symbology and scan the 2
digit hex value from the
save your selection. Default = None

Low Priority Symbology

To specify the low priority symbology, scan the Low Priority Symbology bar code
below. On the
want to set as low priority. Locate the Hex value for that symbology and scan the 2
digit hex value from the
If you want to set additional low priority symbologies, scan FF, then scan the 2 digit
hex value from the
up to 5 low priority symbologies. Scan

Preferred Symbology Time-out

Once you have enabled Preferred Symbology and entered the high and low priority
symbologies, you must set the time-out period. This is the period of time the scan-
ner will search for a high priority bar code after a low priority bar code has been
encountered. Scan the bar code below, then set the delay (from 1-3,000 millisec-
onds) by scanning digits from the
then scanning Save. Default = 500 ms.
52
Symbology Charts,
Programming Chart,
High Priority Symbology
Symbology Charts,
Programming Chart,
Programming Chart
Low Priority Symbology
Preferred Symbology Time-out
beginning on page 211, find the symbology you
beginning on page 225. Scan
beginning on page 211, find the symbology you
beginning on page 225.
for the next symbology. You can program
Save to save your selection. Default = None.
Programming Chart,
Orbit 7120plus/7190g User Guide
Save
beginning on page 225,
to