Honeywell ORBIT 7120PLUS User Manual page 132

Default = Don't Require 2 Digit Addenda.
* Don't Require 2 Digit Addenda
EAN-13 Beginning with 978 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13
bar codes that begin with "978." The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 bar codes that begin with "978" must have a
5 digit addendum. The EAN-13 bar code with the 5 digit addendum is then trans-
mitted as a single, concatenated bar code. If a 5 digit addendum is not found
within the
Don't Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda,
and you want to disable this feature, scan Don't Require 5 Digit Addenda. EAN-13
bar codes are transmitted, depending on the setting you are using for
Addenda
Default = Don't Require 5 Digit Addenda.
* Don't Require 5 Digit Addenda
EAN-13 Beginning with 979 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13
bar codes that begin with "979." The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 bar codes that begin with "979" must have a
5 digit addendum. The EAN-13 bar code with the 5 digit addendum is then trans-
mitted as a single, concatenated bar code. If a 5 digit addendum is not found
within the
Don't Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda,
and you want to disable this feature, scan Don't Require 5 Digit Addenda. EAN-13
bar codes are transmitted, depending on the setting you are using for
Addenda
118
Addenda Timeout period, the EAN-13 bar code is discarded.
Required.
Addenda Timeout period, the EAN-13 bar code is discarded.
Required.
Require 2 Digit Addenda
Require 5 Digit Addenda
Orbit 7120plus/7190g User Guide
EAN/JAN-13
EAN/JAN-13