Reading Techniques; Standard Product Defaults; Usb Pc Keyboard - Honeywell ORBIT 7190G Quick Start Manual

Reading Techniques

Present the bar code to the scanner. The aimer turns on and the
LEDs turn up to read the code. If the light level in the room is not
high enough, the code may not be read.

Standard Product Defaults

The following bar code resets all standard product default set-
tings.
Standard Product Defaults

USB PC Keyboard

Scan the following code to program the scanner for a USB PC
Keyboard.
USB PC Keyboard
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS
terminal using port 9B, scan the appropriate code below to pro-
gram the terminal, then power cycle the cash register. If you
have an IBM POS terminal using port 17, scan IBM Port 17
Interface bar code below.