Step 7.
Other Programming Selections
•
•
•
•
Orbit 7120plus/7190g User Guide
Scan Save to save your data format, or Discard to exit without saving your
changes.
Enter Data Format
Discard
Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary
format, scan 0 from the
clearing an alternate format, scan 1, 2, or 3, depending on the format you are
clearing. Scan the Terminal Type and Code I.D. (see
211), and the bar code data length for the specific data format that you want to
delete. All other formats remain unaffected.
Clear all Data Formats
This clears all data formats.
Save
Exit and save your data format changes.
Discard
Exit without saving any data format changes.
Clear One Data Format
Save
Programming Chart,
beginning on page 225. If you are
Symbology Charts
Clear All Data Formats
Save
on page
Discard
67