Honeywell ORBIT 7120PLUS User Manual page 149

QR Code Append
This function allows the scanner to append the data from several QR Code bar
codes together before transmitting them to the host computer. When the scanner
encounters an QR Code bar code with the append trigger character(s), it buffers
the number of QR Code bar codes determined by information encoded in those bar
codes. Once the proper number of codes is reached, the data is output in the order
specified in the bar codes. Default = On.
QR Code Page
QR Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
then appear properly.
Orbit 7120plus/7190g User Guide
* On
on page 218), and scan the value and the
Programming Chart, beginning on page 225. The data characters should
QR Code Page
Maximum Message Length
Off
ISO 2022/ISO 646
Save bar code
135