CHAPTER
8
UTILITIES
Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded
symbology. (See the
acter code that identifies each symbology.) This action first clears all current pre-
fixes, then programs a Code I.D. prefix for all symbologies. This is a temporary
setting that is removed when the unit is power cycled.
Show Decoder Revision
Scan the bar code below to output the decoder revision.
Show Scan Driver Revision
Scan the bar code below to output the scan driver revision. The scan driver controls
image capture.
Orbit 7120plus/7190g User Guide
Symbology Charts,
beginning on page 211 for the single char-
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Decoder Revision
Show Scan Driver Revision
169