Chapter 2 - Program The Interface; Introduction; Program The Interface - Plug And Play; Keyboard Wedge - Honeywell ORBIT 7120PLUS User Manual

CHAPTER
2
PROGRAM THE INTERFACE

Introduction

This chapter describes how to program your system for the desired interface.

Program the Interface - Plug and Play

Plug and Play bar codes provide instant scanner set up for commonly used inter-
faces.
Note: After you scan one of the codes, power cycle the host terminal to have the interface in
effect.

Keyboard Wedge

If you want your system programmed for an IBM PC AT and compatibles keyboard
wedge interface with a USA keyboard, scan the bar code below. Keyboard wedge is
the default interface.
Note: The following bar code also programs a carriage return (CR) suffix.
Orbit 7120plus/7190g User Guide
IBM PC AT and Compatibles with
CR suffix
7