Mobile Phone Read Mode; Reread Delay - Honeywell ORBIT 7120PLUS User Manual

Mobile Phone Read Mode

Note: This feature is the default for the Orbit 7120plus scanner and cannot be changed. It
is only configurable for the Orbit 7190g scanner.
When this mode is selected, your scanner is optimized to read bar codes from a
mobile phone or other LED displays. However, the speed of scanning printed bar
codes may be slightly lower when this mode is enabled.

Reread Delay

This sets the time period before the scanner can read the same 1D bar code a sec-
ond time. Setting a reread delay protects against accidental rereads of the same
1D bar code. Longer delays are effective in minimizing accidental rereads. Use
shorter delays in applications where repetitive 1D bar code scanning is required.
Reread Delay only works when in a
Short.
42
* Short (500 ms)
Long (1000 ms)
Presentation Scanning -
Mobile Phone
Presentation Mode
Orbit 7120plus/7190g User Guide
* Poor Quality PDF Reading
Off
(see page 37). Default =
* Medium (750 ms)
Extra Long (2000 ms)