CHAPTER
1
GET STARTED
About This Manual
This User's Guide provides installation and programming instructions for the Orbit
7120plus and Orbit 7190g hybrid presentation scanners. Product specifications,
dimensions, warranty, and customer support information are also included.
Honeywell bar code scanners are factory programmed for the most common ter-
minal and communications settings. If you need to change these settings, pro-
gramming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpack Your Device
After you open the shipping carton containing the product, take the following
steps:
•
Check for damage during shipment. Report damage immediately to the carrier
who delivered the carton.
•
Make sure the items in the carton match your order.
•
Save the shipping container for later storage or shipping.
Power Information
Use only a Listed Limited Power Source (LPS) or Class 2 type power supply with
output rated 5 to 5.2Vdc, 1A.
Orbit 7120plus/7190g User Guide
1