Chapter 11 - Maintenance And Troubleshooting; Repairs; Maintenance; Clean The Scanner - Honeywell ORBIT 7120PLUS User Manual

CHAPTER
1 1
MAINTENANCE AND
TROUBLESHOOTING

Repairs

Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center. See
page xi.

Maintenance

Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following periodic checks
ensure dependable operation:

Clean the Scanner

The scanner or base's housing may be cleaned with a soft cloth or tissue damp-
ened with water (or a mild detergent-water solution.) If a detergent solution is
used, rinse with a clean tissue dampened with water only.
Caution: Do not submerge the scanner in water. The scanner's housing is

Inspect Cords and Connectors

Inspect the interface cable and connector for wear or other signs of damage. A
badly worn cable or damaged connector may interfere with scanner operation.
Contact your distributor for information about cable replacement. Cable replace-
ment instructions are on
Orbit 7120plus/7190g User Guide
not watertight. Do not use abrasive wipes or tissues on the
scanner's window. Abrasive wipes may scratch the window.
Never use solvents (e.g., acetone) on the housing or window.
Solvents may damage the finish or the window.
page 208.
Customer Support on
207