Honeywell ORBIT 7120PLUS User Manual page 92

F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as:
34567890
<CR>
Stop suppressing characters
FC Disables suppress filter and clear all suppressed characters. Syntax = FC.
Replace characters
E4 Replaces up to 15 characters in the output message, without moving the cursor.
Replacement continues until the E5 command is encountered. Syntax =
E4nnxx
in the list (characters to be replaced plus replacement characters); xx
characters to be replaced and xx
through zz
E4 Example: Replace zeros with CRs in bar code data
If the bar code has characters that the host application does not want included,
you can use the E4 command to replace those characters with something else. In
this example, you will replace the zeros in the bar code above with carriage returns.
Command string: E402300DF10D
E4 is the "Replace characters" command
02 is the total count of characters to be replaced, plus the replacement characters
(0 is replaced by CR, so total characters = 2)
30 is the hex value for 0
0D is the hex value for a CR (the character that will replace the 0)
F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as:
1234
5678
ABC
<CR>
78
xx yy yy ...zz zz where nn is the total count of the number of characters
1 2 1 2 1 2
and zz .
1 2
defines replacement characters, continuing
2
Orbit 7120plus/7190g User Guide
defines
1